I have mounted the wheel inside the house to test and it seems that everything works fine, when the temperature has risen the fan has started. It has been connected with the gotway application and also with Wheelog without problems, I tested it in a vacuum and the maximum speed alarm sounds and cuts when appropriate.
The only problem is that when you turn on the wheel, the 2 rear LEDs always stay on and always red.
The 2 front LEDs if you can change the mode, flashing, fixed or off, but there is also red always on the last 2 below while the top if responding to the mode change.
So when I put the mode off of the LEDs. Always keep the 2 rear LEDs full (from top to bottom) lit and red and in the 2 LEDs on the front it stays all off (from top to almost bottom) minus 2 red lights that stay on the part down.